Table of Contents
Advertisement
10. Troubleshooting
Message
"Paper size and type are
mismatched. Select another
tray from the following and
press [Continue]. To cancel
job, press [Job Reset].
Paper size and type can
also be changed in User
Tools."
"Paper size of n is
mismatched. Select another
tray from the following and
press [Continue]. Paper
type can also be changed
in User Tools."
(A tray name is placed at
n.)
"Problem: Printer Font Error" An error has occurred in the
"Problems with the wireless
card. Please call service."
(A "wireless LAN board" or
"Bluetooth unit" is referred
to as a "wireless card".)
"The selected file(s)
contained file(s) without
access privileges. Only
file(s) with access privileges
will be deleted."
186
Causes
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
The size of the paper in the
tray does not match the paper
size specified in the printer
driver.
font settings.
The machine has detected a
Bluetooth failure, or it could
not detect a Bluetooth unit. It
may be incorrectly installed.
You have tried to delete files
without the authority to do so.
Solutions
• Check that the printer driver
settings are correct, and then
load paper of the size selected
in the printer driver into the input
tray. For details about how to
change the paper size, see
"Changing the Paper Size",
Paper Specifications and Adding
Paper
.
• Select the tray manually to
continue printing, or cancel a
print job. For details about how
to select the tray manually, or
cancel a print job, see "If an
Error Occurs with the Specified
Paper Size and Type", Print
Select a tray containing paper that is
the same size as the specified paper
size.
Contact your service representative.
Check that the Bluetooth unit is
installed properly, or contact your
service representative.
To check your access permission for
stored documents, or to delete a
document you do not have permission
to delete, see Security Guide
.
.
Advertisement
Table of Contents
