Table of Contents
Advertisement
remaining originals. In this case, the resulting sorted pages will not be sequential. For details about
Memory Full Auto Scan Restart, see "Input / Output", Copy/ Document Server
Messages Displayed When Using the Facsimile Function
This section describes the machine's main messages. If other messages appear, follow their instructions.
• Settings that can be confirmed in System Settings or Facsimile Features on the control panel can
also be confirmed from Web Image Monitor. For details about how to confirm the settings from
Web Image Monitor, see Web Image Monitor Help.
Message
"Cannot detect original size.
Select scan size."
"Cannot find the specified
path. Please check the
settings."
"Check whether there are
any network problems."
[13-10]
"Check whether there are
any network problems."
[13-11]
Causes
The machine failed to detect
the size of the original.
The name of the computer or
folder entered as the
destination is wrong.
The alias telephone number
you entered is already
registered on the gatekeeper
by another device.
Cannot access gatekeeper.
When Messages Are Displayed on the Control Panel
.
Solutions
On the control panel, under [Scan
Size], specify the scan area in [Scan
Settings], and then resend the
document. For details about settings
scan size, see "Scan Settings", Fax
Check that the computer name and the
folder name for the destination are
correct.
• Check that the correct alias phone
number is listed in [H.323
Settings] of [Facsimile Features].
For details about H.323 Settings,
see "Initial Settings", Fax
• For details about network
problems, contact your
administrator.
• Check that the correct gate
keeper address is listed in [H.323
Settings] of [Facsimile Features].
For details about H.323 Settings,
see "Initial Settings", Fax
• For details about network
problems, contact your
administrator.
.
.
.
167
Advertisement
Table of Contents
