Integrating Groups From An Active Directory, Ntv4, Or Nis Domain; Deleting A Group - Linksys NSS6000 Series Administrator's Manual

Setting up End-User Access

Integrating Groups from an Active Directory, NTv4, or NIS Domain

STEP 4
STEP 5
Integrating Groups from an Active Directory, NTv4, or
NIS Domain
NOTE

Deleting a Group

STEP 1
Lynksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
Set up the Users in Group list as required. (The single angled bracket "<" or ">"
moves the selection in the direction of the bracket. The double angled bracket
"<<" or ">>" moves the entire list in the direction of the bracket.)
Click Update.
When the NSS is joined to an Active Directory, NTv4, or NIS domain, domain
groups are imported into the Configured Groups list. Group membership for
imported domain groups are read-only. The naming conventions use the NetBIOS
format with the domain name as a prefix of the group name. For example,
"DOMAINNAME\GroupName"
Make sure that you set up your User and Group ID ranges before you join the NSS
to an ADS, NTv4, or NIS domain. After you join the NSS to a domain, you should not
make changes to the range as this might lead to an ID collision.
When you delete a group, the group is automatically removed from having access
to any configured shares.
To delete a group:
From the Manager Menu, click Access Groups.
5
84