Integrating Users From An Ads, Ntv4, Or Nis Domain - Linksys NSS6000 Series Administrator's Manual

Setting up End-User Access

Integrating Users from an ADS, NTv4, or NIS Domain

STEP 3
STEP 4
Integrating Users from an ADS, NTv4, or NIS Domain
NOTE
Lynksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
The username is read-only. You can make changes to any of the other fields in the
user's profile.
Click Update.
When the NSS is joined to an ADS, NTv4, or NIS domain, a list of existing domain
users is imported into the Configured Users list. You can view the entire user list
from the Configured Users page but can only edit or delete locally created users
(not domain users). The naming conventions use the NetBIOS format with the
domain name as a prefix of the username. The primary group for users set up
within the ADS, NTv4 or NIS domain is taken from the user's domain profile versus
the Primary Group field in the NSS user profile.
Make sure that you set up your User and Group ID ranges before you join the NSS
to an ADS, NTv4, or NIS domain. After you join the NSS to a domain, you should not
make changes to the range as this might lead to an ID collision.
5
78