Managing The Nss Configuration - Linksys NSS6000 Series Administrator's Manual

Managing the NSS

Managing the NSS Configuration

Managing the NSS Configuration
NOTE
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
-
Network Filters: cleared
-
Network Default Policy: Accept All
-
MTU Size: 1500
You can save the current configuration settings within a configuration file that can
be used to restore the settings at a later time. You can choose to save the
configuration file to a volume on the NSS or you can save the file to a USB flash
device that is inserted into the AUX-1 port on the front of the chassis. When you
save the configuration file, it is time and date stamped and becomes available in
the list of available configuration files when you click the Restore button from the
Configuration Manager page. After you mount the USB flash device by inserting it
into the AUX-1 port, make sure you unmount the USB flash device before you
remove it. (To unmount the USB flash device, display the Storage Status page and
then click Unmount.
f you restore a configuration file that was saved in an older version of the NSS
firmware than the current version, check the settings after you restore the file to
make sure that they were updated correctly.
To display the Configuration Manager page, from the Manager Menu, click
Admin Configuration.
7
133