Linksys NSS6000 Series Administrator's Manual page 83

Setting up End-User Access
Creating a User Profile
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
Lynksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
To add a local user:
From the Manager Menu, click Access
The Configured Users page appears. Users created from the NSS
configuration interface and provided by the ADS, NTv4, or NIS domain appear
in the Configured Users table.
Click Add to create a user.
The New User page appears.
In the Username field, type the username. The name must be made up of
alphanumeric characters (that is, a-z, 0-9), any case, to a maximum of 32
characters. This field is required.
Select the group you want to assign as the user's primary group from the Primary
Group field. If there are no groups configured, the only available choice is the
default group "nasusers". This field is required.
Although you can assign the user to multiple groups (through the Add Group or Edit
Group page), the primary group is the group against which quota charges for the
user's storage usage are made and is the group that defines the group ownership
for all files created by the user. The primary group applies to users set up locally on
the NSS. A domain user's primary group is set up from the domain and is not
derived from the Primary Group field in the NSS user profile
Users.
5
75