Volumes Table; Usb Storage Status - Linksys NSS6000 Series Administrator's Manual

Configuring your Storage

Volumes Table

Volumes Table

USB Storage Status

Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
The Volumes table provides a list of the existing volumes. The table is made up of
the following:
•
Location: The name of the RAID array on which the volume is configured.
•
Volume: The name assigned to the volume.
•
Total Space: The amount of space configured for the volume.
•
Used Space: The amount of space used on the volume.
•
Avail. Space: The amount of unused space on the volume.
•
% Used: The percentage of available space that is used.
•
Encrypted: Whether the volume is encrypted or unencrypted.
•
Locked: The encrypted volume is locked and is not accessible. To make the
volume accessible, the volume must be unlocked.
If you mount a USB flash device by inserting it into the AUX-1 port on the front of
the chassis, the USB Storage Status table appears. If there is no USB flash device
mounted, the USB Storage Status table does not appear. You can use the USB
flash device to save a backup of the configuration file (see
Configuration" section on
click Unmount before you remove it from the AUX-1 port. (The AUX-1 LED on the
front of the chassis must be off before you can safely remove the USB flash
device.) If you remove the USB flash device in a mounted state, you risk corrupting
the files or filesystem.
The USB Storage Status table provides these details about the mounted USB
flash device:
•
Disk: The type of disk in this case is the USB flash.
•
Total Space: The total amount of space (both used and available) on the
USB flash device.
•
Used Space: The amount of space taken up on the USB flash device.
•
Available Space: The amount of unused space on the USB flash device.
page134). When you finish using the USB flash device,
4
"Saving the Current
40