Setting up End-User Access
Defining the Default Network Policy
STEP 2
Defining the Default Network Policy
STEP 1
Lynksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
The Network Filters page appears.
You can do any of the following:
•
Set the default network policy to control what happens to traffic not
explicitly covered by defined filters. (see
Policy," on page
•
View or delete the existing filters defined for the NSS from the Active
Network Access Filters table.(see
•
Create a new filter based on an IP or MAC address or a range of IP
addresses. (see
The default network policy is the overarching policy that defines the gateway for
communication to the NSS. It specifies how traffic that is not covered by defined
filters is handled. The default policy can be defined to either accept or reject
such traffic.
To define the default network policy:
From the Manager Menu, click Access
94)
"Network Filters Overview," on page
"Creating a Network Filter," on page
Network.
"Defining the Default Network
96)
5
93)
94