Saving The Current Configuration - Linksys NSS6000 Series Administrator's Manual

Managing the NSS

Saving the Current Configuration

Saving the Current Configuration
NOTE
STEP 1
STEP 2
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
The Configuration Manager page appears.
You can save a copy of the NSS configuration if you need to restore the settings at
a later time. When you save the configuration file, it saves a date-stamped version
of the current configuration settings to the specified volume on the NSS. You can
save the current configuration settings to a specified volume on the NSS or you
can save the file to a USB flash device inserted into the AUX-1 port.
If you restore a configuration file that was saved in an older version of the NSS
firmware than the current version, check the settings after you restore the file to
ensure they were updated correctly.
To save the current configuration:
If you are saving the configuration file to a USB flash device, insert a USB flash
device into the AUX-1 port on the NSS chassis.
From the Manager Menu, click Admin Configuration.
7
134