Lan Led (Front Panel); Hard Disk Drive Leds - Linksys NSS6000 Series Administrator's Manual

Troubleshooting

Hard Disk Drive LEDs

Hard Disk Drive LEDs
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide

LAN LED (Front Panel)

The LAN LED shows the status of the Ethernet link. These are the LED colors and
their meanings:
•
Solid Green: The LAN link is up and running at 1000 link speed, but is
currently idle.
•
Flickering Green: The LAN link is up and running at 1000 link speed and is
currently active. The LED flickers off with activity.
•
Solid Yellow: The LAN link is up and running at 10/100 link speed, but is
currently idle.
•
Flickering Yellow: The LAN link is up and running at 10/100 link speed and
is currently active. The LED flickers off with activity.
•
Off: No LAN link is detected.
These LEDs shows the disk-drive activity, the error conditions, and locate statte of
the .installed disk drives.
The green LED indicates drive activity. These are the LED colors and their
meanings.
•
Solid Green: The disk drive is configured but is currently idle.
•
Flickering Green: The disk drive is configured, active, and not rebuilding.
Flickers off with activity.
•
Blinking Green: The disk drive is configured and a RAID array is currently
rebuilding to the disk drive.
•
Off: The disk drive is not configured (not part of a RAID or JBOD array and
not exported).
The red LED means that the drive is in an error condition. These are the LED colors
and their meanings
•
Solid Red: The drive is in a failed state.
•
Blinking Red: The drive is predicated to fail (via S.M.A.R.T.). We recommend
that you replace the drive to avoid the loss of data.
A
157