Linksys NSS6000 Series Administrator's Manual page 106

Setting up End-User Access
Available Access Filters
NOTE
Lynksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
Rejecting versus Dropping Traffic: When incoming traffic matches a reject filter,
the NSS drops the traffic and then sends a notice to the initiating system of the
denial of service. When incoming traffic matches a drop filter, the NSS drops the
traffic but no notice is sent to the initiating system.
•
Allow All: This is the default filter. It tells the NSS to accept traffic via all
supported protocols.
•
Allow CIFS: Allow CIFS filesharing access.
•
Allow FTP: Allow FTP and FTPS access.
•
Allow HTTP: Allow access to the NSS configuration interface through a
Web browser.
•
Allow NFS: Allow NFS access.
•
Reject CIFS: Do not allow CIFS filesharing access. The NSS informs the
system initiating the connection about the denial of service.
•
Reject FTP: Do not allow FTP or FTPS traffic. The NSS informs the system
initiating the connection about the denial of service.
•
Reject HTTP: Do not allow access to the NSS configuration interface via a
Web browser. The NSS informs the system initiating the connection about
the denial of service.
•
Reject NFS: Do not allow NFS filesharing access. The NSS informs the
system initiating the connection about the denial of service.
•
Drop CIFS: Do not allow CIFS filesharing access. The NSS does not inform
the system initiating the connection about the denial of service.
•
Drop FTP: Do not allow FTP or FTPS traffic. The NSS does not inform the
system initiating the connection about the denial of service.
•
Drop HTTP: Do not allow access to the NSS configuration interface via a
Web browser. The NSS does not inform the system initiating the connection
about the denial of service.
•
Drop NFS: Do not allow NFS filesharing access. The NSS does not inform
the system initiating the connection about the denial of service.
5
98