Managing the NSS
Configuring the Timing Settings
STEP 1
STEP 2
NOTE
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
If the synchronization failed, the following occurs:
•
An error message stating "Could not synchronize with NTP server(s)"
appears in the NTP Configuration page.
•
The system alert message "Could not synchronize with NTP server(s)"
appears in the System Status page.
•
If the SNMP traps are configured, an SNMP trap message is sent.
To configure the time settings for the NSS:
From the Manager Menu, click Admin
The NTP Configuration page appears.
To use an NTP server to maintain the NSS time, click Automatically (via NTP). To
assign the time manually, skip to step 4.
If the NSS joins to the ADS domain, you must enter the IP address of the domain
controller into the NTP server field and uncheck Assign automatically via DHCP.
Otherwise, the NSS will not join the domain.
Time.
7
141