Restoring A Configuration File - Linksys NSS6000 Series Administrator's Manual

Managing the NSS

Restoring a Configuration File

Restoring a Configuration File
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
You can easily overwrite the current configuration settings with the configuration
settings in a saved configuration file.
If you restore a configuration file that was saved in an older version of the NSS
firmware than the current version, check the settings after you restore the file to
ensure they were updated correctly.
To restore a configuration file:
From the Manager Menu, click Admin
The Configuration Manager page appears.
If the configuration file is not located on a volume in the NSS, copy it onto a USB
flash device and then insert the USB flash device into the AUX-1 port.
From the Stored Configuration Location field, select the location of the saved
configuration file.
Click Update.
Click Restore.
Configuration.
7
137