Linksys NSS6000 Series Administrator's Manual page 125

Managing the Shares
Configuring the NSS for FTP Access
NOTE
STEP 1
STEP 2
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
Select this option if the NSS is located behind a firewall and/or router. By default,
the FTP server sets the NSS IP address to passive mode.
Passive Mode FTP through a router and/or firewall only works on a single interface.
If you have VLANs defined, you must choose which interface to access through FTP.
To configure Passive Mode FTP, follow these steps:
From the Manager Menu, click Network
The Network Port Configuration page appears.
Verify the FTP port number on the NSS (port number 21 is the default setting).
To use a non-default port number, enter the new port number in the FTP/FTPS
Server Port field (For example: 8028) and then click Update. You must also
specify this port number in your router configuration software.
Ports.
6
117