Available Access Filters - Linksys NSS6000 Series Administrator's Manual

Setting up End-User Access

Available Access Filters

STEP 3
STEP 4
Available Access Filters
Lynksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
•
Subnet: Enter the subnet to set a filter for all the addresses within the
subnet. The format should appear as shown in the following example:
192. 1 68. 1 .0/24 (where the digits following the slash represent the number of
bits in the network portion of the IP address).
From the Filter drop-down menu, select the type of filter you want to apply to the
IP/MAC address.
Click Add.
Any connections that apply to the new filter rule are affected by the rule during
the next connection attempt.
When you configure network filters, determine which protocols can or cannot
access the NSS. To display the list of available filters, click the drop-down arrow
next to the Filter field on the Network Filters page.
5
97