Migrating A Raid Array To Another Storage Device - Linksys NSS6000 Series Administrator's Manual

Configuring your Storage

Migrating a RAID Array to another Storage Device

STEP 2
STEP 3
Migrating a RAID Array to another Storage Device
STEP 1
STEP 2
STEP 3
STEP 4
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
The RAID page appears.
Click Delete in the row of the RAID array that you want to delete.
A warning message appears.
To continue, click OK.
The deleted array disappears from the list of existing arrays. The disks used in
the array are released back into available storage and appear in the New RAID
Device table.
If you are migrating a RAID array from the NSS to another network NSS, make sure
that you coldplug the RAID array (instead of hotplugging it) into the new system by
following these steps:
Power down the NSS (from which you are removing the RAID array).
Remove each of the disk drives that make up the RAID array to be moved.
Power down the NSS to which you are migrating the RAID array.
Insert each of the disk drives in the RAID array into the new NSS.
4
48