Allowing A Vlan Access To The Nss - Linksys NSS6000 Series Administrator's Manual

Adding the NSS to your Network

Allowing a VLAN Access to the NSS

Allowing a VLAN Access to the NSS
STEP 1
STEP 2
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
•
Label: A text description for the VLAN (for example, "Data," "Voice," "Video,"
and so on). This description is used solely as a reference within the NSS
interface and does not affect
its operation.
To set up a network VLAN to access the NSS:
From the Manager Menu, click Network
The VLAN Configuration page appears.
In the New VLAN area of the page, set up the following fields:
•
Link: Select the Ethernet link on which you want the VLAN to connect to the
NSS. Available options depend on the configuration of your Ethernet link(s).
•
VLAN: Enter the ID of the VLAN as it is defined within your network. The
range of valid VLAN IDs is from 0 to 4095.
•
Priority: Select the QoS priority for the VLAN traffic as it is defined for your
network. Valid options range from 0 to 7 (as defined by the IEEE 802. 1 p
standard). VLAN Ethernet frames contain a three-bit priority tag ranging
from 0 to 7 (where 0 is best effort and 7 is network-critical traffic).
VLAN.
3
21