Configuring The Network Link Ip - Linksys NSS6000 Series Administrator's Manual

Adding the NSS to your Network

Configuring the Network Link IP

Configuring the Network Link IP
NOTE
STEP 1
STEP 2
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
•
IP Address: The IP address for the physical or virtual interface.
•
Netmask: The netmask for the physical or virtual interface.
•
Gateway: The address of the gateway for the physical or virtual interface.
You need to configure the method for assigning an IP configuration to each
interface connected to the NSS.
If you hotplug the Ethernet link after the initial installation of the NSS, make sure you
that you wait 15 seconds between the time you unplug the cable and then plug it
back in. The NSS displays the correct new settings within 10 seconds.
To set the IP address allocation method for an interface:
From the Manager Menu, click Network
The Network IP page appears listing each interface.
Click Edit on the row of the interface you want to configure.
The Network Link Configuration page appears.
IP.
3
18