System Alerts; Storage Status - Linksys NSS6000 Series Administrator's Manual

Managing the System

System Alerts

System Alerts

Storage Status

Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
The System Alerts section shows any system messages issued since the last
time they were cleared. Messages can range in severity from informational to
immediate action required.
There are three type of system alerts:
•
Error: Indicates the most severe types of problems with the NSS. They are
color-coded red and require immediate action. For example, if a disk drive
or RAID array is in a failed condition.
•
Warning: Indicates that there is a problem with the NSS that requires
eventual action. They are color-coded orange. For example, if the amount of
storage used for a volume is
over 90%.
•
Notification: Shows the recent changes to the NSS. They do not require
action and are color-coded green. For example, the RAID rebuild is
complete.
The Storage area displays these details about the configured storage on the NSS:
•
Drives: The number of physical disk drives installed.
•
RAID Arrays: The number of configured RAID arrays.
•
Volumes: The number of configured volumes.
•
Total Configured Capacity: The total aggregate size of all configured
volumes.
•
Percent Used: The total amount of the configured capacity used. The
percentage is color-coded according to the current percentage used:
-
Green: 0 to 74%
-
Orange: 75 to 89%
-
Red: 90 to 100%
2
6