Table of Contents
Advertisement
User Manual
H3C XE 200/2000 IP PBX G-Remote
Note:
When the log function is disabled and the device status window is closed, the GUI
client does not make CPU usage statistics. When the log function is enabled, the
GUI client records the system status in a real-time way, and saves the record in the
log file.
The <Float> button on the device status window is used for floating/docking the
statistics window. For details, refer to
6.3 Telnet Login
Click the [Telnet] tab in the device management window to quickly invoke the Telnet
function provided by Microsoft Windows, and thus you can easily configure network
devices with command lines.
6.4 Saving the Configuration
After changing and confirming the XE IP PBX configuration through the GUI client, you
can save the configuration. Click the [Save On Device] tab in the configuration
management window, and click <Ok> in the dialog box that pops up to save the
configuration, as shown in
Figure 6-4 Save configuration
Note:
It may take a long time for the system to save the configuration. During this process, the
system cannot respond to external requests. Therefore, try to minimize the times of
saving configuration.
6.5 Backup/Recovery of the Configuration File
Through the GUI client, you can easily back up and recover the configuration of the XE
IP PBX in a network. After logging into the XE IP PBX through the GUI client, click the
[Backup/Recovery] tab on the configuration management window, and select the
Floating and
Figure
6-4.
6-11
Chapter 6 System Management
docking.
Advertisement
Table of Contents
