The peer group to be configured with a description must have been created.
Disabling Session Establishment to an IPv6 Peer/Peer Group
Follow these steps to disable session establishment to a peer/peer group:
To do...
Enter system view
Enter BGP view
Enter IPv6 address family view
Disable session establishment to an
IPv6 peer/peer group
Logging IPv6 Peer/Peer Group State Changes
Follow these steps to configure to log on the session and event information of an IPv6 peer/peer group:
To do...
Enter system view
Enter BGP view
Enable logging of peer changes
globally
Enter IPv6 address family view
Enable the state change
logging for an IPv6 peer or peer
group
Refer to BGP Commands in the IP Routing Volume for information about the log-peer-change
command.
Controlling Route Distribution and Reception
The task includes routing information filtering, routing policy application and route dampening.
Prerequisites
Before configuring this task, you need to:
Use the command...
system-view
bgp as-number
ipv6-family
peer { ipv6-group-name |
ipv6-address } ignore
Use the command...
system-view
bgp as-number
log-peer-change
ipv6-family
peer { ipv6-group-name |
ipv6-address } log-change
1-6
Remarks
—
—
—
Optional
Not disabled by default
Remarks
—
—
Optional
Enabled by default.
—
Optional
Enabled by default.