Configuring Edge Node - H3C LS-3100-52P-OVS-H3 Operation Manual

Configuring Edge Node

Follow these steps to configure edge node:
To do...
Enter system view
Create an RRPP domain and
enter its view
Specify a control VLAN for the
RRPP domain
Specify protected VLANs for
the RRPP domain
Specify the current device as
the transit node of the primary
ring, and specify the primary
port and the secondary port
Specify the current device as
the edge node of a subring,
and specify the edge port
Enable the primary ring
Enable the subring
Return to system view
Enable RRPP
Use the command...
system-view
rrpp domain domain-id
control-vlan vlan-id
protected-vlan
reference-instance
instance-id-list
ring ring-id node-mode transit
[ primary-port interface-type
interface-number ]
[ secondary-port interface-type
interface-number ] level
level-value
ring ring-id node-mode edge
[ edge-port interface-type
interface-number ]
ring ring-id enable
ring ring-id enable
quit
rrpp enable
1-14
Remarks
—
Required
Required
Required
No protected VLAN is specified
for an RRPP domain by
default.
Required
Required
Required
By default, the RRPP ring is
disabled.
Required
By default, the RRPP ring is
disabled.
—
Required
By default, RRPP is disabled.