Pim-Sm Non-Scoped Zone Configuration Example - H3C LS-3100-52P-OVS-H3 Operation Manual

UpTime: 00:03:27
Upstream interface: Vlan-interface300
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 3
1: Vlan-interface103
Protocol: pim-dm, UpTime: 00:03:27, Expires: never
2: Vlan-interface101
Protocol: pim-dm, UpTime: 00:03:27, Expires: never
3: Vlan-interface102
Protocol: pim-dm, UpTime: 00:03:27, Expires: never

PIM-SM Non-Scoped Zone Configuration Example

Network requirements
Receivers receive VOD information through multicast. The receiver groups of different
organizations form stub networks, and one or more receiver hosts exist in each stub network. The
entire PIM-SM domain contains only one BSR.
Host A and Host C are multicast receivers in two stub networks.
Switch D connects to the network that comprises the multicast source (Source) through
VLAN-interface 300.
Switch A connects to stub network N1 through VLAN-interface 100, and to Switch D and Switch E
through VLAN-interface 101 and VLAN-interface 102 respectively.
Switch B and Switch C connect to stub network N2 through their respective VLAN-interface 200,
and to Switch E through VLAN-interface 103 and VLAN-interface 104 respectively.
Vlan-interface 105 on Switch D and Vlan-interface 102 on Switch E act as C-BSRs and C-RPs; the
C-BSR on Switch E has a higher priority; the multicast group range served by the C-RP is
225.1.1.0/24; modify the hash mask length to map a certain number of consecutive group
addresses within the range to the two C-RPs.
IGMPv2 is to run between Switch A and N1, and between Switch B/Switch C and N2.
1-39