H3C LS-5500-28C-PWR-SI-OVS Installation Manual page 78

Installation Manual
H3C S5500-SI Complete Series Ethernet Switches
<H3C> ftp 10.1.1.1
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):S5500
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get S5500-SI.bin
[ftp] get S5500-SI.btm
[ftp] bye
Step 2: Update the Boot ROM program on the switch.
<H3C> bootrom update file S5500-SI.btm
This command will update BootRom file, Continue? [Y/N]y
Updating BootRom, please wait...
Upgrade Bootrom succeeded!
Step 3: Update the host software on the switch.
<H3C> boot-loader file S5500-SI.bin
<H3C> display boot-loader
The current boot app is:
The main boot app is:
The backup boot app is:
Step 4: Restart the switch.
<H3C> reboot
Note:
Before restarting the switch, make sure other configurations are all saved to avoid the
loss of configuration information.
After the steps above, the Boot ROM and host software loading is completed.
Pay attention to the following points:
Host software loading takes effect only after you restart the switch with the reboot
command.
If the space of the flash memory is not enough, you can delete the useless files in
the flash memory before software downloading.
Power interruption is not allowed during software loading.
Chapter 5 Boot ROM and Host Software Loading
flash:/ S5500-SI.bin
flash:/ S5500-SI.bin
flash:/ S5500-SIbak.bin
5-12