H3C LS-5500-28C-PWR-SI-OVS Installation Manual page 21

Installation Manual
H3C S5500-SI Complete Series Ethernet Switches
LED
10/100/1000B
ASE-T
Ethernet port
status LED
Mark Status
Rate
mode
Duplex
mode
—
PoE mode
1-15
Chapter 1 Product Overview
Description
The port works at the rate of
1000 Mbps; the LED blinks
Green
quickly when the port is sending
or receiving data.
The port works at the rate of
10/100 Mbps; the LED blinks
Yellow
quickly when the port is sending
or receiving data.
Yellow,
blinking
POST fails on the port.
(3 Hz)
OFF The port is not connected.
The port works in full duplex
mode; the LED blinks quickly
Green
when the port is sending or
receiving data.
The port works in half duplex
mode; the LED blinks quickly
Yellow
when the port is sending or
receiving data.
Yellow,
blinking POST fails on the port.
(3 Hz)
OFF The port is not connected.
Green, The port supplies power
ON normally
The required power of the
attached devices has exceeded
the maximum power that the
port can supply.
Green,
blinking
The total power that the switch
(1 Hz)
supplies has reached the
maximum power, so the port
does not supply power any
more.
The devices attached to the port
are not powered devices (PDs),
so the port does not supply
Yellow,
power.
ON
The PoE power fails, so the port
cannot supply power.
Yellow,
blinking POST fails on the port
(3 Hz)
OFF The port does not supply power.