H3C LS-5500-28C-PWR-SI-OVS Installation Manual page 60

Installation Manual
H3C S5500-SI Complete Series Ethernet Switches
4) Click <OK> after setting the serial port parameters and the system enters the
following interface.
Figure 4-5 HyperTerminal window
Choose [Properties] in the HyperTerminal dialog box to enter the properties window.
Click [Settings] to enter the following properties setting window, select VT100 as the
terminal emulation, and then click <OK>.
Figure 4-6 Set terminal emulation in properties setting window
Chapter 4 Powering on the Switch for the First Time
4-4