H3C LS-5500-28C-PWR-SI-OVS Installation Manual page 62

Installation Manual
H3C S5500-SI Complete Series Ethernet Switches
Note:
The system has two startup modes: normal startup and fast startup. The normal
startup mode takes a little longer time than the fast startup mode because of more
self-test operations.
By default, the system starts up in fast startup mode and the waiting time here is two
seconds. If you set the startup mode to normal, this waiting time is five seconds. For
the setting of the startup mode, refer to the next section.
If you press <Ctrl + B> within 2 seconds, the Boot Menu is displayed:
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Table 4-1 describes the fields above.
Table 4-1 Description on the fields
BOOT MENU
Download application file to flash
Select application file to boot
Display all files in flash
Delete file from flash
Modify bootrom password
Enter bootrom upgrade menu
Skip current configuration file
Set bootrom password recovery
Set switch startup mode
Reboot
BOOT MENU
Field
Chapter 4 Powering on the Switch for the First Time
Description
Boot menu
Download the application files to the flash
Select application files for switch booting
Display all files in the flash
Delete files from the flash
Modify the password of Boot ROM
Enter Boot ROM upgrade menu
Skip current configuration files
Restore the Boot ROM password
Set the startup mode of the switch
Reboot the switch
4-6