Changing The Startup Mode - H3C LS-5500-28C-PWR-SI-OVS Installation Manual

Installation Manual
H3C S5500-SI Complete Series Ethernet Switches
Enter your choice(0-9):
If you perform no operation or press a key other than <Ctrl+B> within two seconds,
Once the remaining waiting time becomes zero, the system begins to
automatically start up and the following information is displayed:
Auto-booting...
Decompress Image...................................................
...................................................................
...................................................................
...................................................................
...................................................................
...............................................OK!
Starting at 0x80100000...
User interface aux0 is available.
Press ENTER to get started.

4.4.3 Changing the Startup Mode

By default, the system starts up in fast mode. If you want to change the startup mode to
normal, press <Ctrl + B> within two seconds to enter the Boot Menu showed below:
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Enter 9, and the system prompts you to change the startup mode:
Field
BOOT MENU
Chapter 4 Powering on the Switch for the First Time
Description
Enter your choice from 0 to 9
4-7