Table of Contents
Advertisement
Installation Manual
H3C S5500-SI Complete Series Ethernet Switches
Step 2: Enter 3 in the above menu to load the Boot ROM and host software using
XMODEM protocol. The system displays the following download baud rate setting
menu:
Please select your download baudrate:
1.* 9600
2. 19200
3. 38400
4. 57600
5. 115200
0. Return
Enter your choice (0-5):
Step 3: Choose an appropriate download baud rate. For example, if you enter 5, the
115200 bps rate is chosen, and the system displays the following information:
Download baudrate is 115200 bps
Please change the terminal's baudrate to 115200 bps and select XMODEM protocol
Press enter key when ready
The fields above show that the baud rate has been changed, and now you can press
<Enter>.
Note:
If you have chosen 9,600 bps, you do not need to modify the HyperTerminal's baud
rate, and therefore you can skip Step 4 and 5 below and proceed to Step 6 directly. In
this case, the system will not display the above information.
Step 4: Choose [File/Properties] in HyperTerminal, click <Configuration> in the popup
dialog box, select the baud rate of 115,200 bps in the appeared Console port
configuration dialog box.
Chapter 5 Boot ROM and Host Software Loading
5-4
Hide quick links:
Advertisement
Table of Contents
