Using Computer Setup To Reset Cmos - HP Point of Sale rp5000 Troubleshooting Manual

Using Computer Setup to Reset CMOS

✎
Troubleshooting Guide
To reset CMOS through Computer Setup, you must first access the
Computer Setup Utilities menu.
1. Turn on or restart the computer. If you are in Windows, click
Start > Shut Down > Restart the Computer.
F10
2. Press the key as soon as the computer begins to boot. A
choice of five headings appears in the Computer Setup Utilities
menu: File, Storage, Security, Power, and Advanced.
If you do not press the
Windows operating system begins, you must restart the computer
F10
again and press
3. To reset CMOS to the factory default settings, first set the time
and date, then use the arrow keys or the
Set Defaults and Exit. This resets the soft settings that include
boot sequence order and other factory settings. It will not,
however, force hardware rediscovery.
See the Desktop Management Guide on the Documentation CD for
further instructions on reestablishing passwords. For instructions on
Computer Setup, see the Computer Setup (F10) Utility Guide on the
Documentation CD.
www.hp.com
Password Security and Resetting CMOS
F10
key at the appropriate time and the
again to access the utility.
Tab
key to select File >
B–5