Post Numeric Codes And Text Messages - HP Point of Sale rp5000 Troubleshooting Manual

POST Error Messages

POST Numeric Codes and Text Messages

✎
Numeric Codes and Text Messages
Code/Message
101-Option ROM
Error
102-System Board
Failure
103-System Board
Failure
A–2
This section covers those POST errors that have numeric codes
associated with them. The section also includes some text messages
that may be encountered during POST.
The computer will beep once after a POST text message is displayed
on the screen.
Probable Cause
System ROM or
expansion board
option ROM checksum.
DMA or timers
DMA or timers
www.hp.com
Recommended Action
1. Verify the correct ROM.
2. Flash the ROM if needed.
3. If an expansion board was recently
added, remove it and see if the
problem remains.
4. Clear CMOS. (See
"Password Security and Resetting
CMOS.")
5. If the message disappears, there may
be a problem with the expansion
card.
6. Replace the system board.
1. Clear CMOS. (See
"Password Security and Resetting
CMOS.")
2. Remove expansion boards.
3. Replace the system board.
1. Clear CMOS. (See
"Password Security and Resetting
CMOS.")
2. Remove expansion boards.
3. Replace the system board.
Appendix B,
Appendix B,
Appendix B,
Troubleshooting Guide