Configuring Telnet; Figure 160 Telnet Configuration On A Tcp/Ip Network; Figure 161 Remote Management: Telnet; Table 116 Remote Management: Telnet - ZyXEL Communications P-2608HWL-Dx Series User Manual

Figure 160 Telnet Configuration on a TCP/IP Network

23.5 Configuring Telnet

Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.

Figure 161 Remote Management: Telnet

The following table describes the labels in this screen.

Table 116 Remote Management: Telnet

LABEL
Port
Access Status
Secured Client IP A secured client is a "trusted" computer that is allowed to communicate with the
Apply
Cancel
Chapter 23 Remote Management Configuration
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
P-2608HWL-Dx Series User's Guide
DESCRIPTION
297