Back To Factory Defaults; Figure 104 Configuration Restore Successful; Figure 105 Temporarily Disconnected; Figure 106 Configuration Restore Error - ZyXEL Communications P-334WH User Manual

P-334WH User's Guide

Figure 104 Configuration Restore Successful

The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 105 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default ZyXEL Device IP address
(192.168.1.1). See your Quick Start Guide for details on how to set up your computer's IP
address.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.

Figure 106 Configuration Restore Error

20.2.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the ZyXEL Device to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device. Refer to the chapter about introducing the web configurator for more
information on the RESET button.
188 Chapter 20 Tools