Back To Factory Defaults - ZyXEL Communications NBG-417N User Manual

Chapter 20 Tools
After you see a "configuration upload successful" screen, you must then wait one minute before
logging into the NBG-417N again.
Figure 106 Configuration Restore Successful
The NBG-417N automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 107 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default NBG-417N IP address (192.168.1.1). See
Appendix C on page 193
If the upload was not successful, the following screen will appear. Click Return to go back to the
Configuration screen.
Figure 108 Configuration Restore Error

20.4.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the NBG-417N to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your NBG-
417N. Refer to the chapter about introducing the Web Configurator for more information on the
RESET button.
154
for details on how to set up your computer's IP address.
NBG-417N User's Guide