Chapter 5 Wireless Tutorial; Example Parameters; Configuring The Ap - ZyXEL Communications P-334WH User Manual

This chapter gives you examples of how to set up an access point and wireless client for
wireless communication using the following parameters. The wireless clients can access the
Internet through an AP wirelessly.

5.1 Example Parameters

SSID
Channel
Security
802.11 mode
An access point (AP) or wireless router is referred to as "AP" and a computer with a wireless
network card or USB/PCI adapter is referred to as "wireless client" here.
We use the P-334WH web screens and M-302 utility screens as an example. The screens may
vary slightly for different models.

5.2 Configuring the AP

Flow the steps below to configure the wireless settings on your AP.
1 Make sure the ZyXEL Device is set to router mode or access point mode in the
Maintenance > Sys OP Mode screen.
2 Open the Wireless LAN > General screen in the AP's web configurator.

Chapter 5 Wireless Tutorial

Wireless Tutorial
SSID_Example3
Auto
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
IEEE 802.11b/g
P-334WH User's Guide
C
H A P T E R
5
83