Figure 53 PPPoE Encapsulation
The following table describes the labels in this screen.
Table 35 PPPoE Encapsulation
LABEL
ISP Parameters for Internet Access
Encapsulation
Service Name
Chapter 6 WAN
DESCRIPTION
The PPP over Ethernet choice is for a dial-up connection using PPPoE. The
ZyXEL Device supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is
an IETF Draft standard (RFC 2516) specifying how a personal computer (PC)
interacts with a broadband modem (i.e. xDSL, cable, wireless, etc.) connection.
Operationally, PPPoE saves significant effort for both the end user and ISP/carrier,
as it requires no specific configuration of the broadband modem at the customer
site. By implementing PPPoE directly on the router rather than individual
computers, the computers on the LAN do not need PPPoE software installed, since
the router does that part of the task. Further, with NAT, all of the LAN's computers
will have access.
Type the PPPoE service name provided to you. PPPoE uses a service name to
identify and reach the PPPoE server.
P-334WH User's Guide
97