No Security; Wep Encryption; Figure 58 Wifi: No Security - ZyXEL Communications P-334WH User Manual

7.3.1 No Security

If wireless security is not enabled on the access point, select No Security to have the ZyXEL
Device communicate with the access point without any data encryption.

Figure 58 WiFi: No Security

7.3.2 WEP Encryption

WEP encryption scrambles the data transmitted between the wireless clients and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the ZyXEL Device and the access point must use the same
WEP key.
If the access point uses static WEP encryption, select Static WEP from the Security Mode
list.
Your ZyXEL Device allows you to configure up to four 64-bit, 128-bit or 256-bit WEP keys
but only one key can be enabled at any one time.
Chapter 7 WiFi WAN
P-334WH User's Guide
107