Telnet Screen; Ftp Screen; Figure 91 Telnet Remote Management; Table 69 Telnet Remote Management - ZyXEL Communications P-334WH User Manual

P-334WH User's Guide

16.4 Telnet Screen

To change your ZyXEL Device's Telnet settings, click Management > Remote MGMT >
Telnet. The following screen displays.

Figure 91 Telnet Remote Management

The following table describes the labels in this screen.

Table 69 Telnet Remote Management

LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

16.5 FTP Screen

You can upload and download the ZyXEL Device's firmware and configuration files using
FTP, please see the chapter on firmware and configuration file maintenance for details. To use
this feature, your computer must have an FTP client.
166
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 16 Remote Management Screens