Table 65 Bandwidth Management: Advanced - ZyXEL Communications P-334WH User Manual

The following table describes the labels in this screen.

Table 65 Bandwidth Management: Advanced

LABEL
Upstream
Bandwidth (kbps)
Application List
#
Enable
Service
Priority
Advanced Setting
User-defined
Service
#
Enable
Direction
Service Name
Priority
Modify
Apply
Reset
Chapter 15 Bandwidth Management
DESCRIPTION
Enter the amount of bandwidth in kbps (2 to 100,000) that you want to allocate for
traffic. 20 kbps to 20,000 kbps is recommended.
The recommendation is to set this speed to be equal to or less than the speed of
the broadband device connected to the WAN port. For example, set the speed to
1000 Kbps (or less) if the broadband device connected to the WAN port has an
upstream speed of 1000 Kbps.
Use this table to allocate specific amounts of bandwidth based on the pre-defined
service.
This is the number of an individual bandwidth management rule.
Select this check box to have the ZyXEL Device apply this bandwidth management
rule.
This is the name of the service.
Select a priority from the drop down list box. Choose High, Mid or Low.
Click the Edit icon to open the Rule Configuration screen where you can modify
the rule.
Use this table to allocate specific amounts of bandwidth to specific applications
and/or subnets.
This is the number of an individual bandwidth management rule.
Select this check box to have the ZyXEL Device apply this bandwidth management
rule.
Select To LAN to apply bandwidth management to traffic that the ZyXEL Device
forwards to the LAN.
Select To WAN to apply bandwidth management to traffic that the ZyXEL Device
forwards to the WAN.
Select To WLAN to apply bandwidth management to traffic that the ZyXEL Device
forwards to the WLAN.
Enter a descriptive name of up to 19 alphanumeric characters, including spaces.
Select a priority from the drop down list box. Choose High, Mid or Low.
Click the Edit icon to open the Rule Configuration screen. Modify an existing rule
or create a new rule in the Rule Configuration screen. See
page 161 for more information.
Click the Remove icon to delete a rule.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
P-334WH User's Guide
Section 15.9.2 on
159