Time Setting Screen; Table 73 System General - ZyXEL Communications P-334WH User Manual

P-334WH User's Guide
The following table describes the labels in this screen.

Table 73 System General

LABEL
System Name
Domain Name
Administrator
Inactivity Timer
Password Setup
Old Password
New Password
Retype to Confirm
Apply
Reset

18.3 Time Setting Screen

To change your ZyXEL Device's time and date, click Maintenance > System > Time
Setting. The screen appears as shown. Use this screen to configure the ZyXEL Device's time
based on your local time zone.
178
DESCRIPTION
System Name is a unique name to identify the ZyXEL Device in an Ethernet
network. It is recommended you enter your computer's "Computer name" in this
field (see the chapter about wizard setup for how to find your computer's name).
This name can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes "-" and underscores "_" are accepted.
Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
Type how many minutes a management session can be left idle before the
session times out. The default is 5 minutes. After it times out you have to log in
with your password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter how long it
has been left idle (not recommended).
Change your ZyXEL Device's password (recommended) using the fields as
shown.
Type the default password or the existing password you use to access the
system in this field.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to begin configuring this screen afresh.
Chapter 18 System