Dns Screen; Figure 92 Ftp Remote Management; Table 70 Ftp Remote Management - ZyXEL Communications P-334WH User Manual

To change your ZyXEL Device's FTP settings, click Management > Remote MGMT >
FTP. The screen appears as shown.

Figure 92 FTP Remote Management

The following table describes the labels in this screen.

Table 70 FTP Remote Management

LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Reset

16.6 DNS Screen

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on Wizard Setup for background information.
Chapter 16 Remote Management Screens
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
A secured client is a "trusted" computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
P-334WH User's Guide
167