Bandwidth Management General Configuration; Figure 84 Bandwidth Management: General; Table 64 Bandwidth Management: General - ZyXEL Communications P-334WH User Manual

15.8 Bandwidth Management General Configuration

Click Management > Bandwidth MGMT to open the bandwidth management General
screen.

Figure 84 Bandwidth Management: General

The following table describes the labels in this screen.

Table 64 Bandwidth Management: General

LABEL
Enable Bandwidth
Management
Enable Automatic
Traffic Classifier
Apply
Reset
Chapter 15 Bandwidth Management
DESCRIPTION
Select this check box to have the ZyXEL Device apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule
priority over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or
minimum amounts of bandwidth that can be used by traffic that matches a
bandwidth rule.
This field is only applicable when you select the Enable Bandwidth
Management check box.
Select this check box to have the ZyXEL Device base on the default bandwidth
classes to apply bandwidth management. Real-time packets, such as VoIP traffic
always get higher priority.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
P-334WH User's Guide
157