Setting Up Services - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

Setting Up Services

The Cisco Unified Wireless IP Phone 7921G can have up to six lines and up to 24 connected calls. The
default button template uses position 1 for lines and assigns position 2 through 6 as speed dial. You can
assign these features to button positions:
•
•
•
Use softkey features in the Options menu to access other phone features, such as call park, call forward,
redial, hold, resume, conferencing, and so on.
Setting Up Services
The Services menu on the Cisco Unified Wireless IP Phone 7921G gives users access to
Cisco Unified IP Phone Services. These services comprise XML applications that enable the display of
interactive content with text and graphics on the phone. Examples of services include Push to Talk,
directories, stock quotes, and weather reports. Some services, such as Push to Talk, can use the
configurable Applications button located on the side of the phone.
To create customized XML applications for your site, refer to the
Application Development
Before a user can access any service, two important tasks must be completed:
•
•
To set up IP Phone services, follow these steps:
Procedure
Step 1 Before you set up services, gather the URLs for the sites you want to set up and verify that users can
access those sites from your corporate IP telephony network.
Step 2 To set up these services in Cisco Unified Communications Manager 4.x Administration, choose Feature
> Cisco IP Phone Services
or
To set up these services in Cisco Unified Communications Manager 5.x Administration, choose Device
> Device Settings > Phone Services
For more information about phone services, refer to the" Cisco Unified IP Phone Services" chapter in
the Cisco Unified Communications Manager System Guide for more information.
After you configure these services, verify that your users have access to the
Step 3
Cisco Unified Communications Manager User Options web-based application, from which they can
select and subscribe to configured services. See the
Services" section on page A-4
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
7-18
Service URL
Privacy
Speed dial
Notes.
You as the system administrator must use Cisco Unified Communications Manager Administration
to configure available services.
The user must subscribe to services using the Cisco Unified IP Phone User Options application. This
web-based application provides a graphical user interface (GUI) for limited, end-user configuration
of IP Phone applications.
Chapter 7
"How Users Configure Phone Features and
for a summary of the information that you must provide to end users.
Configuring Features, Templates, Services, and Users
Cisco Unified IP Phone Service
OL-15985-01