Configuring Wavelink Avalanche Server Settings; Configuring The Phone Book - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

For cisco unified communications manager 7.0
Hide thumbs Also See for 7921G - Unified Wireless IP Phone VoIP:
Table of Contents

Advertisement

Chapter 4
Using the Cisco Unified Wireless IP Phone 7921G Web Pages

Configuring Wavelink Avalanche Server Settings

The Cisco Unified Wireless IP Phone 7921G supports the use of the Wavelink Avalanche server to
configure the phone, which can be set up as a Wavelink Avalanche client device. The Cisco Unified
Wireless IP Phone 7921 Configuration Utility can be installed on the Wavelink Avalanche server to
configure a single phone or multiple phones with common settings. For more information, see
Configuring the Phone Using the Wavelink Avalanche Server, page
You can use the phone web page to assign attributes to the phone that can be used to distinguish it from
other mobile devices connected to the Wavelink server. These attributes can be used as search criteria
for locating phones on the Wavelink server. For example, the predefined ModelName parameter with a
value of "CP7921G" will identify a device as the Cisco Unified Wireless IP Phone 7921G.
By default, the following parameters are configured as follows:
To configure Wavelink Avalance server parameters using the phone web page, follow these steps:
Procedure
Step 1
From the phone web page, choose WAVELINK SETTINGS.
Step 2
In the Wavelink Custom Parameters section, enter values for each parameter in the Name and Value
fields. You can define up to four pairs of custom parameters.
Note
Note
For more information about using the Wavelink Avalanche server, see
Wavelink Avalanche Server, page

Configuring the Phone Book

Cisco Unified Wireless IP Phone 7921G users can store up to 100 contacts in the Phone Book on the
phone. As the administrator, you can configure the Phone Book for these phones from the phone web
page.
Note
Before you can access the Phone Book from the phone web page, you must enable the Phone Book Web
Access privilege in Cisco Unified Communications Administration. For more information, see
Configuration Privileges for the Phone Web Page, page
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
OL-15985-01
Configuring Network Profiles, page 4-8
Configuring USB Settings, page 4-28
Using System Settings, page 4-36
ModelName = CP7921
EnablerVer = 3.11-01
Do not use spaces in the Name field.
6-1.
4-4.
Configuring Wavelink Avalanche Server Settings
6-1.
Configuring the Phone Using the
Setting
4-31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-7921g-a-k9

Table of Contents