Configuring Cisco Unified Wireless Ip Phones - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

Configuring Features, Templates, Services, and
Users
This chapter provides an overview of the feature configuration and setup, softkey template modification,
services set up, and user assignment in Cisco Unified Communications Manager Administration.
Cisco Unified Communications Manager documentation provides detailed instructions for these
procedures.
This chapter includes the following sections:
•
•
•
•
•
•
•
•
•
•
For suggestions about providing users with information for using the phone and features, see
Appendix A, "Providing Information to Users By Using a Website."
phones in non-English environments, see

Configuring Cisco Unified Wireless IP Phones

To provide telephony call routing and call–control features for the Cisco Unified Wireless
IP Phone 7921G, you must use Cisco Unified Communications Manager Administration. For
instructions about adding these devices, refer to the "Cisco Unified IP Phone Configuration" chapter in
the Cisco Unified Communications Manager Administration Guide.
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
OL-15985-01
Configuring Cisco Unified Wireless IP Phones, page 7-1
Telephony Features Available for the Phone, page 7-2
Product-Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G, page 7-14
Configuring Softkey Templates, page 7-16
Modifying Phone Button Templates, page 7-17
Setting Up Services, page 7-18
Configuring Corporate and Personal Directories, page 7-19
Adding Users to Cisco Unified Communications Manager Administration, page 7-20
Managing the User Options Web Pages, page 7-21
Creating Custom Phone Rings, page 7-22
C H A P T E R
Appendix B, "Supporting International Users."
7
For information about setting up
7-1