Using System Settings; Viewing Trace Logs - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

Using System Settings

Step 4 Click Save. To change a speed dial assignment, click the speed dial icon again and repeat Step 3.
Using System Settings
In addition to phone settings, the web page includes these areas for system management:
•
•
•
•
•
•
For information about the remaining web page topics, see the
Wireless IP Phone Remotely."

Viewing Trace Logs

You can use the TRACE LOGS on the web page to view and manage trace files. System trace logs appear
in a list on this page. You define how many messages are saved in the Trace Settings area.
To view a trace log, click on the "Message.<n>" link. The trace log appears in ASCII text. You can save
the text file in a directory or on a disk to send to TAC for troubleshooting purposes.
To download a trace log, click Download. All the trace logs on the phone are then collected into a file
named SEP<MAC-ADDRESS-OF-PHONE>_LOGS.tar.gz for a downloading and saving.
Note Trace logs are erased when the phone is powered off. To preserve trace logs, see the
Settings" section on page
To display the Trace Logs area, access the web page for the phone as described in the
PC to Configure the Phones" section on page
Related Topics
•
•
•
•
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
4-36
Trace Logs—See Viewing Trace Logs, page 4-36
Backup Settings—See Backup Settings for Phone Configuration, page 4-37
Phone Upgrade—See Upgrading Phone Firmware, page 4-40
Change Password—See Changing the Admin Password, page 4-40
Site Survey—See Viewing the Site Survey Report on the Web, page 4-41
Date and Time—See Setting the Date and Time, page 4-20
4-29.
Using System Settings, page 4-36
Backup Settings for Phone Configuration, page 4-37
Upgrading Phone Firmware, page 4-40
Changing the Admin Password, page 4-40
Chapter 4 Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Chapter 9, "Monitoring the Cisco Unified
4-1, and then click the Trace Logs hyperlink.
"Configuring Trace
"Setting Up Your
OL-15985-01