Upgrading a 40-Slot Library to 60 Slots
Connecting the Library Modules
Connecting the Library Modules
1. Secure the two units together by installing one 10-24 x 0.50 screw
2. Push the library out of the rack, distributing the weight on the lowest
3. Install seven 10-24 x 0.50 screws inside the chassis to secure the two
Figure 3-4
Installing the Screws
3-8
behind each of the top front doors (Figure 3-4). You will need to
remove the magazines and use a short T-25 driver to access these
screw holes.
library module. Do not push the library more than 2/3 of the way out
of the rack.
units together (Figure 3-4).
Chapter 3