HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade Kit page 70

Figure 4-10
Upgrading Library Model 6/140
Securing the Upgrade Module to the Cabinet
3. Move the RFI cable to the top of the upgraded library to minimize
RFI interference (see Figure 4-10). The RFI cable is connected on the
back of the library and between the far left slot and the clip nut on
the library cabinet. Follow these steps to move the cable:
a. Loosen the thumbscrew on the left slot of the second highest
library module, and remove the RFI cable.
b. Install the clip nut so that it is even with the left slot on the
upgrade module (top of the library).
c. Loosen the thumbscrew on the left slot of the upgraded module,
and slide the RFI cable over this screw.
d. Tighten the thumbscrew.
e. Secure the other end of the cable to the clip nut on the left column
with one screw.
Installing the RFI Cable
4-14 Chapter 4