11. From the back of the library and using an additional light source,
CAUTION
Align and install the interconnect cable as show in Figure 3-7. The pins
can become damaged if the cable is incorrectly installed.
Figure 3-7
Installing the Interconnect Cable
Chapter 3
connect the interconnect cable from the motherboard on the upgrade
module to the motherboard on the existing library. The connection
should go from the top connector of the existing library to the bottom
connector of the upgrade module (Figure 3-7). Ensure the cable does
not interfere with other connectors.
Upgrading a 40-Slot Library to 60 Slots
Connecting the Library Modules
3-11