HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade Kit page 48

Figure 3-6
NOTE
Upgrading a 40-Slot Library to 60 Slots
Connecting the Library Modules
7. For rackmounted libraries with a bezel depth of 55 mm, install the
trim brackets on the side of the library (Figure 3-6).
Installing the Trim Brackets
8. Using the vertical handle on the back of the library, pull the library
into the rack.
9. For rackmounted libraries with a bezel depth of 55 mm, secure the
library to the rack by tightening the trim bracket screws.
10. Remove the cards and slot covers from the back of the existing library
to access the interconnect cable. Place the cards in an ESD-protected
area.
Make a note of the card locations and cable configuration.
3-10 Chapter 3